Installation method：Disassemble the connecting rod, and insert the bearings in the grooves. place the small end of the connecting rod, in a vise so it can hold the crank while you are torquing the bolts. Put the crank journal on the long half of the connecting rod, place the other half of the arc connecting rod over the top of the crank journal. Oil the connecting rod bolts. Torque specs indicate 150 inch/pounds. Start by hand tightening the bolts, use an inch pound torque wrench with a 1/4″ 12 point socket，then switch between bolts every 20 inch pounds until they stretch and top out at 150inch pounds.
